1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
(The PCIEX16 slot conforms to PCI Express 4.0 standard.)*
1 x PCI Express x16 slot, running at x4 (PCIEX4)
2 x PCI Express x1 slots
(The PCIEX4 and PCI Express x1 slots conform to PCI Express 3.0 standard)
Multi-Graphics Technology: Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies
CPU: 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU)*
*Supported by 11th Generation processors only.
Chipset: 2 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB) (M2M_SB) I 6 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
Intel® Optane™ Memory Ready
Chipset: 1 x USB Type-C® port on the back panel, with USB 3.2 Gen2 support I 1 x USB Type-C® port with USB 3.2 Gen1 support, available through the internal USB header I 1 x USB 3.2 Gen2 Type-A port (red) on the back panel I 7 x USB 3.2 Gen1 ports (5 ports on the back panel, 2 ports available through the internal USB header)
Chipset+ 2 USB 2.0 Hub: 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors: 1 x 24-pin ATX main power connector I 1 x 4-pin ATX 12V power connector I 1 x 8-pin ATX 12V power connector I 1 x CPU fan header I 4 x system fan headers I 2 x addressable LED strip headers I 2 x RGB LED strip headers I 6 x SATA 6Gb/s connectors I 3 x M.2 Socket 3 connectors I 1 x front panel header I 1 x front panel audio header I 1 x S/PDIF Out header I 1 x USB Type-C® header, with USB 3.2 Gen1 support I 1 x USB 3.2 Gen 1 header I 2 x USB 2.0/1.1 headers I 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) I 2 x Thunderbolt™ add-in card connectors I 1 x serial port header I 1 x Clear CMOS jumper I 1 x Q-Flash Plus button
＊All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W.
Back Panel Connectors: 1 x PS/2 keyboard/mouse port I 1 x USB Type-C® header, with USB 3.2 Gen2 support I 1 x DisplayPort I 1 x USB 3.2 Gen 2 Type-A port (red) I 5 x USB 3.2 Gen 1 ports I 2 x USB 2.0/1.1 ports I 1 x RJ-45 port I 6 x audio jacks
I/O Controller: iTE® I/O Controller Chip
H/W Monitoring: Voltage detection I Temperature detection I Fan speed detection I Fan fail warning I Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
BIOS: 1 x 256 Mbit flash I Use of licensed AMI UEFI BIOS I PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
System Information Viewer
Support for Q-Flash Plus
Support for Q-Flash
Support for Xpress Install
Bundled Software: Norton® Internet Security (OEM version) I Realtek® 8125 Gaming LAN Bandwidth Control Utility
Operating System: Support for Windows 10 64-bit
Form Factor:ATX Form Factor; 30.5cm x 24.4cm
4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory